Home · Profiles & sizes · SAP061
MDF Acoustic Range · Fabric Slat long panel
SAP061 — 60.5 × 240 cm fabric slat long panel
SAP061 is the long panel with a fabric face: MDF slats wrapped in the four fabric finishes — Velvet, Linen, Straw, Leather — 60.5 cm wide and 240 cm long, over the same needle-punched polyester core as the rest of the range. It is the softest wall in the lineup: the slats read as textile rather than wood, and the room feels like it has been upholstered.
- Size
- 60.5 cm wide × 240 cm long · 2.1 cm thick
- Construction
- MDF slats + needle-punched polyester fibre core
- Absorption coefficient
- Up to 0.8
- Best for
- Feature walls, media walls, background walls, wall modelling
Details
SAP061 carries the fabric slat long panel format in the MDF acoustic range at 60.5 cm × 240 cm, 2.1 cm thick. Send the code with your quantity and destination country for a quotation.
Installation
- Measure the wall dimensions.
- Measure the panel and mark the layout.
- Cut to the appropriate size.
- Apply nail-free adhesive to the back.
- Use a power drill to secure the screws to the wall.
- Finish and enjoy it.
Full tool list on the installation page.
Finishes & felt
Four finish families — Velvet, Linen, Straw and Leather — with 21 colour codes, plus six acoustic felt colours. Judge the colour on a sample: screen tones shift with light.
More profiles in this group:
Slats wrapped in fabric
Where the straight-slat panels carry a laminated or film face, SAP061's slats are wrapped in fabric, so the wall reads as a textile surface — a band of soft vertical lines that the light rakes across instead of reflecting off. The four finish families — Velvet, Linen, Straw, Leather, 21 colour codes — apply across the slat run, and the felt behind takes the same colours, so the slats and the shadow lines can be matched or set against each other.
The build is the range standard: high-density MDF slats CNC-cut at the 13 mm pitch, a 2.1 cm depth, and a needle-punched polyester felt core with porosity above 90%. Sound enters the gaps between the slats and is taken out by the felt — the absorption coefficient reaches 0.8, the panel is B1 rated, and it is dust- and moisture-resistant.
A 240 cm fabric run
At 240 cm the panel runs floor to ceiling in one piece, so the fabric run carries up the wall without a horizontal joint — the format feature walls and reception fronts are specified in. One panel covers 1.45 m²; a 6 m × 2.4 m wall takes about 10 panels, and the slat direction is the design decision: vertical for height, horizontal for width, or alternate panel by panel for the woven read.
The fabric face is the one to check on a sample. Velvet, Linen, Straw and Leather move noticeably with light — hold the sample in the room at the angle the wall will be viewed from, and confirm the felt colour against the slat colour in the same light. The full list of the 21 colour codes and six felt colours is on the materials page.
Questions about SAP061
What are the slats on SAP061 wrapped in?
The four fabric finish families — Velvet, Linen, Straw and Leather — with 21 colour codes across them. The felt behind carries the same colours, so the slat face and the shadow lines can be matched or contrasted.
What size is SAP061?
60.5 cm wide by 240 cm long, 2.1 cm deep. At 240 cm it runs floor to ceiling in one piece, and one panel covers 1.45 m².
Is SAP061 different from SAP062?
They share the fabric-slat long panel format. SAP061 is the code listed in the size table; SAP062 is its same-size sibling. They are quoted as separate codes — send the one that matches your sample.