Home · Profiles & sizes · SAP007
MDF Acoustic Range · Straight Slat long panel
SAP007 — 60.5 × 120 / 240 cm straight slat long panel
SAP007 is the dual-length straight-slat panel: 60.5 cm wide, available in 120 cm and 240 cm, 2.1 cm deep. At 240 cm it runs floor to ceiling in one piece; at 120 cm it covers a half-height wall or a wide beam without a horizontal joint. The slats do the decorating; the felt behind them takes the echo out.
- Size
- 60.5 cm wide × 120 / 240 cm long · 2.1 cm thick
- Construction
- MDF slats + needle-punched polyester fibre core
- Absorption coefficient
- Up to 0.8
- Best for
- Feature walls, media walls, background walls, wall modelling
Details
SAP007 carries the straight slat long panel format in the MDF acoustic range at 60.5 cm × 120 / 240 cm, 2.1 cm thick. Send the code with your quantity and destination country for a quotation.
Installation
- Measure the wall dimensions.
- Measure the panel and mark the layout.
- Cut to the appropriate size.
- Apply nail-free adhesive to the back.
- Use a power drill to secure the screws to the wall.
- Finish and enjoy it.
Full tool list on the installation page.
Finishes & felt
Four finish families — Velvet, Linen, Straw and Leather — with 21 colour codes, plus six acoustic felt colours. Judge the colour on a sample: screen tones shift with light.
More profiles in this group:
One piece, floor to ceiling
At 240 cm, SAP007 runs from floor to ceiling in a single board — no horizontal seam, no visible joint, one continuous slatted run. That is the format reception fronts, media walls and feature ceilings are specified in: a long wall that reads as one surface rather than stacked panels. The 120 cm length is the same profile at half the run, for walls that stop at a dado or a window line.
The 60.5 cm width is the standard for the long-panel group. The slats are CNC-cut at 13 mm over the needle-punched polyester felt core, and the 2.1 cm depth is the pocket that carries the absorption — up to 0.8, with B1 fire resistance built in.
Covering a long wall with SAP007
One 240 cm panel covers 1.45 m²; one 120 cm panel covers 0.73 m². A 6 m × 2.4 m feature wall (14.4 m²) takes about 10 of the 240 cm boards, or 20 of the 120 cm boards. The long format means fewer boards, fewer joints, and a cleaner slatted run — the pattern carries across the whole wall without a break.
For the finish, order a sample of SAP007 in the Velvet, Linen, Straw or Leather family you are choosing between. The four families and 21 colour codes are on the materials page; the sample is the moment to confirm the tone in the room's actual light.
Questions about SAP007
Can I mix 120 cm and 240 cm SAP007 panels on one wall?
Yes — both lengths carry the same 60.5 cm width and the same slat pitch, so they can be mixed on a single wall. The sales team will confirm the layout in the quotation if you are combining the two lengths.
What is the absorption rating on the 240 cm panel?
Up to 0.8, the same as the rest of the range. The felt core is the same needle-punched polyester, and the 2.1 cm depth gives it the same working space whether the panel is 120 cm or 240 cm long.
How is the 240 cm panel fixed?
The same six-step sequence as the rest of the range: measure, mark, cut (if needed), adhesive to the back, screws with a power drill, finish. The longer panel takes two fix points top and bottom rather than one; the full sequence is on the installation page.