Home · Profiles & sizes · SAP009
MDF Acoustic Range · Straight Slat long panel
SAP009 — straight slat MDF panel, 60.5 cm wide
SAP009 is the third code in the straight-slat long panel group: 60.5 cm wide, 120 or 240 cm, 2.1 cm deep — the same dimensions the size table gives to SAP007 and SAP008. Three codes, one profile, one slat pitch: the group is how the range covers a wall that needs the slatted run in long boards.
- Size
- 60.5 cm wide × 120 / 240 cm long · 2.1 cm thick
- Construction
- MDF slats + needle-punched polyester fibre core
- Absorption coefficient
- Up to 0.8
- Best for
- Feature walls, media walls, background walls, wall modelling
Details
SAP009 joins SAP007 in the straight slat long panel group — the same 60.5 cm × 120 / 240 cm, 2.1 cm thick format, carried as its own code for quotation. Send the code with your quantity and destination country for a quotation.
Installation
- Measure the wall dimensions.
- Measure the panel and mark the layout.
- Cut to the appropriate size.
- Apply nail-free adhesive to the back.
- Use a power drill to secure the screws to the wall.
- Finish and enjoy it.
Full tool list on the installation page.
Finishes & felt
Four finish families — Velvet, Linen, Straw and Leather — with 21 colour codes, plus six acoustic felt colours. Judge the colour on a sample: screen tones shift with light.
More profiles in this group:
Three codes, one long profile
SAP007, SAP008 and SAP009 share the 60.5 cm width and the 120 / 240 cm lengths. In the size table, SAP008 and SAP009 are listed as the same size as SAP007. The slats run at the 13 mm pitch over the needle-punched polyester felt core, the depth is 2.1 cm, and the absorption coefficient reaches up to 0.8 with B1 fire resistance.
The 240 cm length runs floor to ceiling in one piece — the format reception fronts and feature ceilings are specified in. The 120 cm length is the same profile at half the run, for walls that stop at a window line or a dado.
Quoting the long-panel run
Send the code, the quantity and the destination country with the wall dimensions, and the sales team replies within 24 hours with the quotation. If the design uses more than one code from the group, list them together — the team confirms the layout and the finish options in one reply.
For the finish, the four fabric families — Velvet, Linen, Straw, Leather — with 21 colour codes and six felt colours apply across the group. The materials page carries the full list; order a sample to confirm the tone in the room's light.
Questions about SAP009
What are the dimensions of SAP009?
60.5 cm wide, 120 or 240 cm long, 2.1 cm deep — the same size as SAP007 and SAP008 in the size table on the profile index.
What is the difference between SAP007, SAP008 and SAP009?
There is no difference in size or construction — the size table lists them as the same profile. They are separate codes in the range, and the sales team confirms which code matches the sample you are working from.
How is the panel fixed?
Adhesive to the back plus screws, in six steps on the installation page. The 240 cm board takes two fix points top and bottom.