Home · Profiles & sizes · SAP013
MDF Acoustic Range · Straight Slat wall tile
SAP013 — 60 × 60 cm MDF slat acoustic tile
SAP013 is the square-format slat tile: a 60 cm board, 2.1 cm deep, with MDF slats set over a needle-punched polyester felt core. It is the tile you reach for when the wall is big enough to read a pattern but small enough to hang yourself — a media wall, a headboard wall, a corner that needs to stop carrying echo.
- Size
- 60 cm wide × 60 cm long · 2.1 cm thick
- Construction
- MDF slats + needle-punched polyester fibre core
- Absorption coefficient
- Up to 0.8
- Best for
- Feature walls, media walls, background walls, wall modelling
Details
SAP013 carries the straight slat wall tile format in the MDF acoustic range at 60 cm × 60 cm, 2.1 cm thick. Send the code with your quantity and destination country for a quotation.
Installation
- Measure the wall dimensions.
- Measure the panel and mark the layout.
- Cut to the appropriate size.
- Apply nail-free adhesive to the back.
- Use a power drill to secure the screws to the wall.
- Finish and enjoy it.
Full tool list on the installation page.
Finishes & felt
Four finish families — Velvet, Linen, Straw and Leather — with 21 colour codes, plus six acoustic felt colours. Judge the colour on a sample: screen tones shift with light.
More profiles in this group:
Why the 60 cm square works on its own
The tile is the unit. Because it is a flat 60 × 60 square, a wall is planned in whole tiles first and then trimmed to the room — not the other way round. That keeps offcuts low and makes it the format a decorator can take up on their own, one square at a time, around a TV or a bed, or in a nook where a full-length panel would simply not fit.
Depth is where the acoustics live. At 2.1 cm the slats sit in front of a pocket of needle-punched polyester felt; sound enters the gaps between the slats and is taken out by the felt rather than thrown back. The result is a surface that reads as warm wood slats while carrying an absorption coefficient of up to 0.8, with B1 fire resistance built in.
Working a wall out of SAP013 tiles
One tile covers 0.36 m². A typical 3 m × 2.4 m feature wall is about 7.2 m², so plan on the order of 20 tiles before any cut at the edges. Line the slats the same way across the whole wall for a quiet, even run, or turn alternate tiles a quarter and the pattern reads woven — that is how the fan and woven compositions in our project photos are built from the same square.
For the finish, do not decide from a screen. Order a sample of SAP013 in the finish and felt you are choosing between, and hold it in the light of the actual room — the four fabric families move noticeably with light, and that is the moment to lock the code.
Questions about SAP013
How big is one SAP013 tile, and how thick?
Each tile is 60 cm wide by 60 cm long and 2.1 cm deep. It is a single square board, so a wall is planned in whole tiles and the last row is trimmed on site.
Is SAP013 the same format as SAP014 and SAP004?
Yes — the three share the 60 × 60 cm straight-slat tile format. They are quoted as separate codes; send the one you want with the finish code and we confirm the match on the sample.
Can I cut SAP013 to fit an awkward corner?
Yes. The tile is designed to be cut to the wall on site — measure, mark, cut to size, then fix with the adhesive and screws. The full sequence and tool list are on the installation page.