Home · Profiles & sizes · SAP014
MDF Acoustic Range · Straight Slat wall tile
SAP014 — straight slat MDF acoustic tile
SAP014 is a straight-run slat tile in the MDF acoustic range: evenly spaced slats at 13 mm over a felt core, cut at 60 × 60 cm so the board fits a wall section by section. If you want the classic slatted look without a specialist fitter, this is the profile it is quoted for.
- Size
- 60 cm wide × 60 cm long · 2.1 cm thick
- Construction
- MDF slats + needle-punched polyester fibre core
- Absorption coefficient
- Up to 0.8
- Best for
- Feature walls, media walls, background walls, wall modelling
Details
SAP014 joins SAP013 in the straight slat wall tile group — the same 60 cm × 60 cm, 2.1 cm thick format, carried as its own code for quotation. Send the code with your quantity and destination country for a quotation.
Installation
- Measure the wall dimensions.
- Measure the panel and mark the layout.
- Cut to the appropriate size.
- Apply nail-free adhesive to the back.
- Use a power drill to secure the screws to the wall.
- Finish and enjoy it.
Full tool list on the installation page.
Finishes & felt
Four finish families — Velvet, Linen, Straw and Leather — with 21 colour codes, plus six acoustic felt colours. Judge the colour on a sample: screen tones shift with light.
More profiles in this group:
What the 13 mm spacing does
The slats on SAP014 are CNC-cut at a standard 13 mm gap. That spacing is the balance point of the panel: wide enough for air — and sound — to pass through to the felt behind, narrow enough that the slatted face still reads as a solid, rhythmic pattern at arm's length. The felt core is 100% polyester fibre, needle-punched into a porous structure, and the package carries B1 fire resistance.
Because the run is straight across the whole tile, the eye follows it edge to edge. That is why the profile is the one quoted for TV backgrounds and office partition faces: a long, quiet line behind the thing you are looking at.
Ordering the tile family
SAP014 shares its 60 × 60 cm straight-slat format with SAP013 and SAP004. The three are quoted separately by code, and the size table on the profile index lists them side by side. If a wall can take either, order a sample of the code you are leaning toward first — the finish and felt families are the same across the range, so the sample comparison is direct.
Quantity works in tiles: one board is 0.36 m², and the sales team will confirm the cutting plan for your layout with the quotation. Fixing is adhesive plus screws, in six steps, on the installation page.
Questions about SAP014
What is the slat spacing on SAP014?
13 mm, CNC-cut at the standard spacing the range uses. It is the gap that lets sound reach the felt core while keeping the face looking like an even slatted run.
Can I mix SAP014 with SAP013 on one wall?
They share the 60 × 60 cm format and the same finish and felt families, so a wall can combine them. Send both codes with the quotation if that is the composition you have in mind and the sales team will confirm how the two match up.
How many SAP014 tiles do I need for my wall?
One tile is 0.36 m². Measure the wall, divide by 0.36, and allow for the cut at the edges — then send the figure with your quantity and we confirm the plan with the quotation.